The frit on vertical sawing machine is received implement operation form

  • Time:
  • Click:117
  • source:KOMANG CNC Machining
One, frit receives: 1, adjust pressurization first Niu Zhi puts in null buy 's charge. 2, curium take two end to grind smooth, feng Qi, osculant, rocker clamp. 3, rotate pressurization adjusts button. 4, buy of dislocation coming back depends on the scale that curiums bandwidth spends every 2mm pressurization to adjust button to enter 1 scale. 5, receive switch by frit, press bottom, time needs 3~6 second to just let go about. 2, temper: 1, loosen curium belt, pressurization adjusts Niu Gui " 0 " the position, rocker again clamp curiums belt. 2, press temper switch gently, make curium take temperature to rise to small red to let go time needs 1~2 second about. 3, so gradational reduce temperature to operate 3~6 continuously second. 4, frit receives Mao Bian to grind temperature is narrated before after dividing, be being compared again a bit low, relapse 1~3 second. 3, attention: 1, rocker is like when frit is received cannot clamp curiums belt, loosen fixed screw first, next reuse whole arbor of screwdriver modulate coming back goes to one word but clamp angle. 2, same curium belt should avoid interface of too much loss, receive in same interface frit as far as possible, the beard before receiving will before each 3mm left and right sides excises both sides of second solder mouth. 3, according to our company 20 years of experience, frit receives undesirable absolutely big factor is factitious operation is not familiar with, reason frit receives an operation to often must practice. Above is released at net of sawing machine of limited company of machinery of aid Nanning luck to reprint note in the open to go out please. CNC Milling CNC Machining